UHLMANN - UPS 300 - Blister

Automatic alternating motion blister for tablets, dragées, capsules, etc Machine not tested, sold as is Equipped with: - PVC or Alu film reel holder - PVC film thermoforming station using flat tooling - Product distribution station by hopper with disc and vertical ramps and by universal box - Presence control station produced by camera (subject to operation because the parts are no longer made) - Aluminium film reel holder - Blister heat sealing station with embossing printing station (currently without characters) - Length adjustment station for the forward "pitch" - Blister cutting station by cookie cutter - PVC belt conveyor for receiving finished blister packs length 600 mm - width 160 mm - PVC belt conveyor length 1650 mm - width 200 mm of blister outlet with alignment system for lining them up and ejection system for bad blister packs - Control box with timer and temperature controllers - General drive by motor-variator - Protective guards Current tools: - Complete tools: 1 front blister 120 x 70 mm, 28 tablets diameter 10 mm - thickness 4 or 5 mm - Incomplete tooling: without thermoforming plate and without heat sealing plate - 1 blister cutting tool 90 x 46 mm, for 3 front blister packs with all guide rails - 1 100 x 70 mm blister cutting tool, for 2 front blister packs with all guide ramps - 1 blister cutting tool 108 x 74 mm, for 2 front blister packs with all guide rails Maximum production: 60 cycles/minute (approximately 100 to 150 blister packs per minute depending on the number of blister packs per cycle) Total electrical power: 6 kW Maximum compressed air pressure: 6 to 8 bar