InfoTEC - 4121 PRO EVO - Vertical CNC machining center - 2020
- Lot:
- A1-28382-1
- opoczno, PL
Collection by appointment
- Current bid
- Status
Activate Auto-bid
Recommended
About this lot
Machine working speed X, Y, Z: X:80m/min Y:80m/min Z:12m/min
HITECO 8.5 kW | HSK 63F electric spindle
• Compressed air blowing during tool change
• Inverter control, smooth control of the rotational range
• Air cooling system
• Built on ceramic bearings
Tool magazine 14 positions and tool height sensor.
Drilling unit 8 | 8 | 2
Multifunctional drilling unit mounted next to the electrospindle for vertical and horizontal drilling
It also has a saw for undercutting.
Drilling head power 1.7 kW.
Unit controlled by an inverter.
The drilling head has 8 independent positions for vertical drilling and 8 for horizontal drilling, in a standard spacing of 32 mm. Additionally, it is equipped with 2 saws for undercutting the detail. Drilling can be done individually or simultaneously.
WORK TABLE WITH ACCESSORIES
- Automatic part push-off system + 2 short base pins
- 8-section vacuum table
- Z axis lift up to 350mm
- 8 pieces of suction cups for material fixing
- X axis extension
2 BECKER PUMPS 250 m3
4 ADDITIONAL MECHANICAL BASES
RECEPTION TABLE FOR FINISHED ELEMENTS
HITECO 8.5 kW | HSK 63F electric spindle
• Compressed air blowing during tool change
• Inverter control, smooth control of the rotational range
• Air cooling system
• Built on ceramic bearings
Tool magazine 14 positions and tool height sensor.
Drilling unit 8 | 8 | 2
Multifunctional drilling unit mounted next to the electrospindle for vertical and horizontal drilling
It also has a saw for undercutting.
Drilling head power 1.7 kW.
Unit controlled by an inverter.
The drilling head has 8 independent positions for vertical drilling and 8 for horizontal drilling, in a standard spacing of 32 mm. Additionally, it is equipped with 2 saws for undercutting the detail. Drilling can be done individually or simultaneously.
WORK TABLE WITH ACCESSORIES
- Automatic part push-off system + 2 short base pins
- 8-section vacuum table
- Z axis lift up to 350mm
- 8 pieces of suction cups for material fixing
- X axis extension
2 BECKER PUMPS 250 m3
4 ADDITIONAL MECHANICAL BASES
RECEPTION TABLE FOR FINISHED ELEMENTS
- Lot number:
- A1-28382-1
- Location:
- opoczno, PL
- Sold by:
- Company seller
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- InfoTEC
- Type
- 4121 PRO EVO
- Year of build
- 2020
- Serial number
- 1210/20
- Travel x-axis
- 2200mm
- Travel y-axis
- 4100mm
- Travel z-axis
- 250mm
- Taper
- HSK 63F
Documents
2,590 kg
CO₂e
This is the amount of carbon emissions you could save by purchasing this item pre-owned instead of new.For comparison, an Amsterdam - Berlin flight corresponds to 78 kg CO₂e per passenger.
