2010 Pioneer Variodust FP378 Dust Collector System

-Separation efficiency >99.9%, -Compressed air requirement 5 - 6 bar, oil and water free, approx. 135 l/cycle at 5 bar, -Device: -Filter unit depth 1,560 mm, -Filter unit width 3,120 mm, -Filter unit height 3,065 mm, -Pressure vessel with 6 solenoid valves 1 1/2", -Pre-separator chamber, -Air outlet nozzle DN 800 mm, -RAL 5015 paintwork, -Collection hopper Variodust 2x with flange for auger, higher support frame, -Trough screw DN 219 x 4,400 lg, -Outlet DN 250, inlet 214 x 2,880, -Motor approx. 1.5 kW, approx. 32 rpm, -Rotary valve made of GG, 1.1 kW, -Inlet and outlet DN 250, -Welded steel impeller without edge washers, -Geared motor 1.1 kW, 230/400 V, 33 min-1, 8,910 L/h at 100% filling, -Drive motor no Atex zone, Fabr. SEW, with elast. Clutch -Outlet nozzle rotary valve ZSFI, -Ignition source-free design, -Compressed air service unit 1/4" connection thread with pressure reducer, -Level detector FTM20, 1", AC/DC, -Centrifugal fan 63-99/3 in welded industrial version with base frame made of profiled steel, -max. vacuum 3,300 Pa, -Frequency 50 Hz, -Sound insulation hood MHI63 galvanized, without paint, -Auto. Control differential pressure dependent, -Special design in control cabinet IP65, -Dimensions 800 x 2,000 x 400 mm, -Residual dust sensor FRE 06, -Analog output 4 - 20 mA, IP 65, -24 V DC, EX II 3 D, pluggable, -Piping -Gate valve -Exhaust silencer.