2006 Hundegger Speedcut SC1-160 wood processing center

Speed-Cut machine SC1-160 Consisting of: walk-in roller conveyor with roller stop, 2 feed rollers at least positioning with an independent measuring system. base frame, machine frame, plating and Safety devices Saw unit (with vertical and transverse adjustment) Saw unit: Equipped with an HM saw blade Ø 650 mm, cutting width 5.6 mm, z = 96 and P = 9.2 kW power directly driven. The saw unit is above the workpiece is placed. The sawing movements, high/low and turning, are hydraulically driven and by means of a, of the drive Independent, digital encoder automatically positioned. The infinitely adjustable height adjustment of the saw is adjusted by of the wood dimensions are calculated and optimized each time. Control of swiveling and turning the saw unit With this option, the saw unit is expanded to a full-fledged 5 axle controlled station. The saw unit has an extra degree adjustment, so that the can rotate up to 360° by means of an electromotive positioning and allowing it to be adjusted from 0 - 65° by means of a servo hydraulic swivel can be tilted. The saw can be used to cut up to 160 mm high at a vertical Z-Axis (= 90°). With this aggregate, various saw cuts (angles, notches can be carried out. electronic control and control panel with TFT screen and industrial keyboard Electronic control and control panel Suitable for entering common dimensions of the part to be machined directly to the machine computer. Due to this fully automatic positioning of all saw spindles, the machine has no set-up times. Suitable for common cuts (such as e.g. degrees, angle, schifterschnitt and schulpen) as macros and Easy to call up. Auto clamping system (consisting of horizontal and vertical clamps) discharge system with 2nd gripping and positioning system for surrender with push-off rule